Job Archives
- Creation of Engineering drawings and specifications.
- Documentation of solutions
- Work closely with supplier for development components
- B.E – Mechanical/Automobile Engineering with Relevant experience (4-10 Years)
- Hands on work experience in similar automotive domain preferred
- Experience in commercial vehicle industry will be an added advantage
- Good knowledge on design of plastic, sheet metal components along with manufacturing process
- The requirement is in Powertrain installation group in Chassis Engineering.
- Preferred area of work is Engine peripherals - like Air intake, Noise shields, recirculation shield, Engine cooling system, oil fill and check areas.
- Extensive hands on experience Surfacing in Catia software is mandatory
- Exposure to vehicle packaging and DMU mock up
- Creation of Engineering drawings and specifications.
- Familiar to different types of truck/automotive aggregates preferred
- Strong in engineering fundamentals and its applications
- Good networking and interpersonal skills with good verbal and written communication.
- Good team player and contributor in Cross Functional Teams
Job Features
Job Category | Engineering |
Experience | 4 to 10 years |
Educational Qualification | B.E – Mechanical |
Work Location | Pune |
- 3-8 years of experience in design of automotive components and systems using Catia.
- Mechanism concept design experience would be preferred.
- CAD design - 3D and 2D in CATIA V5: Efficient 3D model creation for latch components, sub-assemblies and assemblies.
- Geometric Dimensioning and Tolerancing for part drawings. Understanding the tolerances assigned on existing drawings an also assigning tolerances for new drawings.
- Product Knowledge in automotive Closure system(preferred). At least experience in different mechanism design.
- Basic travel and effort calculation for latch mechanisms, position kinematics for mechanisms will be advantageous.
- Knowledge in design considerations for sheet metal, plastic design and manufacturing (DFM and DFA)
- Basic level knowledge of heat treatment, material science and manufacturing science is desirable.
- Interpretation of technical specification and understanding and ability to define and analyze problems, collect data, establish facts, and draw valid conclusions and solutions.
Job Features
Job Category | Engineering |
Experience | 3-8 years |
Work Location | Pune / Bangalore |
No. of Positions | 10 |
- Define and maintain aesthetic gap and flush target requirements
- Analyze, Define and maintain BiW , Exterior and Interior datum targets, as per 3-2-1 principle (reference system)
- Perform tolerance calculation for BiW, Exterior and Interior – Build Tolerance simulation/analysis models in RDnT software environment
- Find solutions to deviations from tolerance calculations
- Attend project regular meetings, understand and gather necessary inputs, resolve queries - Interact closely with local and onsite GAE counterparts, Product development engineers, Studio engineers, etc
- Perform functional tolerance calculations apart from Gap and Flush area
- Below are the GAE Deliverables which are created by using RDnT software:
- Pre Tolerancing document, which captures datum targets and GD&T callouts of the component
- Gap Flush document, which captures nominal values with tolerances of gap and flush requirements for different interfaces
- Measurement Points document, which captures feature points on components for which measurement will be done and reported
- Tolerance calculation model, created using RDnT software
- Applied experience and strong knowledge in GD&T – person will get skilled in defining datum targets, 3-2-1 principle, apply GD&T callouts to BiW, Exterior and Interior components, define and optimize tolerances.
- Design & Validation of Checking fixture – Locating holes, Go-NoGo, Datums, Support features.
- Strong Tolerance Stackup skill – 1D, 2D and 3D tolerance analysis and modelling using RDnT
- Working Knowledge about Aesthetical Gap Flush definitions and Requirements setting at Vehicle level.
- Working Knowledge about Measurements tools like Faro arm, CMM, etc and hands-on experience of using it.
- Catia, RDnT/3DCS/Vis VSA or any 3D tolerance analysis software, PDM link, MS office
- Excellent communication and presentation skills.
- Analytical aptitude.
- Basic CAD tool knowledge.
- Supportive & collaborative attitude
- Mindset driven to make things happen in the organization, culture awareness
Job Features
Job Category | Engineering |
Experience | 5 to 10 years |
Work Location | Pune / Bangalore |
No. of Positions | 03 |
Job Features
Job Category | Engineering |
Experience | 5 to 10 years |
Work Location | Bangalore |
No. of Positions | 06 |
Job Features
Job Category | Engineering |
Experience | 3 to 8 years |
Work Location | Pune / Bangalore |
No. of Positions | 09 |
- Design of Steering and Suspension system components
- Installation of different pneumatic / Electrical components
- Pneumatic and electrical routing across chassis & Cabin
- Creation of Schematics
- Design of casting anchorages and heat shields
- Design of Sheet metal Complex brackets
- Work closely with supplier for development components.
- Engineering documentation of drawings and specifications.
- Documentation of solutions
- B.E – Mechanical/Automobile Engineering with Relevant experience (~3 – 10) Years)
- Hands on work experience in similar automotive- Steering / Brakes domain preferred
- Experience in passenger car vehicle industry will be an added advantage
- Good knowledge of application of GD&T
- Good knowledge on design of sheet metal brackets and casting component design.
- Design and installation of Steering & Suspension system
- Routing knowledge of pneumatic & electrical harnesses
- Extensive hands on experience in Catia V5 and TC softwares is mandatory
- Exposure to vehicle packaging and DMU mock up
- Design and installation of different mechanical components on chassis
- Familiar to different types of automotive aggregates preferred
- Strong in engineering fundamentals and its applications
- Good networking and interpersonal skills with good verbal and written communication.
- Good team player and contributor in Cross Functional Teams
Job Features
Job Category | Engineering |
Experience | 3 to 10 years |
Educational Qualification | B.E – Mechanical |
Work Location | Pune / Bangalore |
No. of Positions | 03 |
Job Features
Job Category | Engineering |
Experience | 3 to 10 years |
Work Location | Pune / Bangalore |
No. of Positions | 05 |
Job Features
Job Category | Engineering |
Experience | B.E – Mechanical/Automobile Engineering with Relevant experience 3 to 10 Years |
Work Location | Pune / Bangalore |
- Design for durability, assembly, aftermarket and corrosion. Ensures that designs meet the structural and ergonomic requirements as defined by the customer and any market regulations.
- Conduct regular design reviews to assure that designs meet required specifications.
- Work closely with manufacturing, quality control and purchasing for the implementation of new products.
- Work with suppliers to coordinate prototyping activities and to insure design expectations are met.
- To develop, maintain & communicate a common way of working concerning a clear & easy understandable product structure.
- Experience of working with suppliers to lead the development activities with a good level of product development cycle understanding.
- Experience with vehicle products design and manufacturing industry.
- Experience in Automotive regulations is added plus.
- Hands-on experience in Plastics and Metal Engineering Technology (Injection Modeling, Metal Forming)
- Interior Automotive experience preferably in IP, DP, CCB, Air Vents.
- Quality Tools experience, MFG Process knowledge – Plastic Tooling, Fixtures etc is must.
- Vehicle Regulatory knowledge (FMVSS, ECE, AIS) will be an added advantage
- Tolerance calculation and Quality Tools (FMEA, RCA, Risks).
- Automotive product development knowledge, dimensional management
- Checking fixture knowledge.
- Experience of designing & developing plastic and Sheet metal components for automotive applications.
- Experience of product development within exterior environment such as Bumper system, Ingress/Egress system, Front under-run protection system of commercial vehicles and/or cars.
- Possess sound knowledge in Problem solving techniques by effectively using Quality tools such as 8D/ FTA.
- Knowledge about Commercial Vehicle regulations and Certification activities.
- Hands on experience in tooling (Die, Press/Injection Mold/Die-cast) is preferred.
- Quality Tools experience, MFG Process knowledge – Metal forming, Plastic Tooling, Fixtures etc.
- Vehicle Regulatory knowledge (FMVSS, ECE, AIS) will be an added advantage
- Tolerance calculation and Quality Tools (FMEA, RCA, Risks).
- Automotive product development knowledge, dimensional management
- Checking fixture knowledge
Job Features
Job Category | Engineering |
Experience | 3 to 10 years |
Work Location | Pune / Bangalore / Hyderabad |
No. of Positions | 15 |
Cyber Security Practice:
Besides offering software services to top cybersecurity players in product development, ASM Technologies is expanding in the field of MDR & Compromise Assessment.
Cyber risk has grown exponentially in last few years & organizations are finding it difficult to keep up their guard in this dynamic threat landscape. While they have been able to do good amount of work on Prevention side, they are falling short on Detection & Remediation capabilities. It’s hard for an organization to find if their infrastructure has been compromised & in case they do so then to do the required containment & remediation is a big pain point for them. ASM is helping such organizations with highly specialized services of MDR & Compromise Assessment.
As per ResearchAndMarkets.com, the managed detection and response (MDR) market generated $893.8 million in 2019; it is set to grow at a CAGR of 16.4% and reach $1,907.9 million by 2024. With the increasing number and complexity of threats, the internal management of information security has become increasingly laborious and costly. In this context, outsourcing should be viewed as a strategic ally for securely managing IT environments in line with companies' business strategies.
Leveraging the partnership with global cyber security product vendors (https://asmltd.com/Press-Release/ASM-EclecticIQ-PR.pdf), ASM is looking for Cyber Security Practice Lead to lead the Managed Detection and Response (MDR) (Infra monitoring, Security Assessment, Incident Response, Post Breach Forensic) offering.
Responsibilities include, but are not limited to:
- Candidate will take ownership of growing and managing this practice, thereby helping in the growth of our overall Cybersecurity Practice.
- Candidate will develop and execute an aggressive growth strategy, bring new ideas, concepts and solutions to our clients based on understanding of the market’s evolving needs and objectives.
- Identify, develop and execute client proposals
- Ensures that quality standards are practiced in the course of providing client service. Review documentation and client reports as necessary, resolving any problems during the engagements.
- Works within budgetary and time constraints while providing high-level client satisfaction.
- Anticipate and address client concerns and escalate problems as they arise.
- Maintains excellent relationships with our MDR clients.
- Lead, coach and mentor teams, providing guidance, support and resources for professional and career growth and development.
- Maintain comprehensive knowledge of Cybersecurity risks, best practices and operating frameworks.
Must have experience, skills & capabilities related to:
- Experience: 10-15 years working with established cyber security services (MSSP/MDR) or in CISO offices of large organizations or related to Cybersecurity consulting.
- Strategic business development including orchestrating and executing client business development plans or development, communication and execution of a growth strategy for managed security services.
- Experience of conceptualizing service offerings and taking to market
- Ability to lead customer discussions with thought leadership
- Develop & maintain client relationships and manage all aspects of an engagement.
- Ability to articulate cyber issues in context of the business risks.
- Comprehensive understanding of the Cybersecurity industry, risks, regulations and technology solutions.
- Solid understanding of Security Operations Center (SOC) management / Managed Detection and Response (MDR) operations.
- Building a dedicated and motivated team of Cybersecurity consultants
- Lead the operating group & integrate and leverage thought leadership efforts.
- Strong communication skills, executive presence and ability to build relationships at all levels.
Technical Skills needed:
- Industry accredited Cyber security/IT security certifications
- Hands-On with deployment and management of endpoint security solutions (Anti-Malware, EDR, DLP, File Integrity Monitoring, vulnerability management)
- Good understanding of how to leverage Threat Intel & Threat Hunting procedures
- Understanding of Cyber security frameworks like MITRE ATT&CK and CIS controls
- Hands on with different OSINT tools
- Understanding of different attack vectors and use of forensic and monitoring tools like volatility, osquery, Sysmon for incident investigation
- Experience with different SIEM technologies
- Moderate to high level of programming expertise with languages like Python will be an added advantage
Job Features
Job Category | Engineering |
Experience | 10+Years |
Educational Qualification | Bachelor in Computer Science, Computer Engineering, Software Engineering or related fields |
Work Location | Bangalore |
- Experience in software design and implementation
- Proficient in C++ and Object Oriented Analysis & Object Oriented Design Methodologies
- Knowledge of Standard Template Library (STL), BOOST or equivalent is highly preferred
- Able to quickly learn and understand existing or newly created features and functionality for advanced packaging equipment. Able to troubleshoot and problem solve software and hardware issues by using software tools.
- Multi-threaded Programming
- Strong ability to understand and learn existing C++ software project, able to work independently to develop new control software features for advanced packaging equipment
- Prior experience in the architecture, design and development of real-time control software for semiconductor equipment with software preferred
Job Features
Job Category | Engineering |
Experience | 7+ Years |
Educational Qualification | Bachelor in Computer Science, Computer Engineering, Software Engineering or related fields |
Work Location | Bangalore |
Job Code | CD 001 |
- Full stack development experience
- Experience with backend web development – node JS
- Experience with frontend web development – HTML, CSS, JQuery, and JavaScript
- Experience with Jasmine, Selenium or other testing framework
- Experience with Python / C++
- Nice to have: Experience with Data Visualization libraries (High charts, D3, Bokeh)
Job Features
Job Category | Engineering |
Experience | 3+ Yrs |
Educational Qualification | Bachelor’s degree (or higher) in Computer Science or related degree |
Work Location | Bangalore |
Job Code | DV 001 |
- 2-3 years of software coding experience
- A Bachelor’s degree or higher is preferred
- Experienced with Risk Based Testing and Agile testing
- Experience in all phases of the development process
- Experience with the Ranorex and Robot Framework test suite is a plus
- Experience with Git source code management.
- Performing manual and automated testing both on simulations and physical equipment
Job Features
Job Category | Engineering |
Experience | 7+ years of experience |
Educational Qualification | Bachelor’s degree (or higher) in Computer Science or related degree |
Work Location | Bangalore |
Job Code | TE 001 |
- 2-3 years of software coding experience
- A Bachelor’s degree or higher is preferred
- Experience with Windows image deployment highly preferred
- Administrative experience with Atlassian tool chain (Bit bucket, Bamboo, JIRA, Confluence) a plus
- Creating unattended installation images for embedded hardware (Windows Embedded/IoT and Ubuntu)
Job Features
Job Category | Engineering |
Experience | 3+ years of experience |
Educational Qualification | Bachelor’s degree (or higher) in Computer Science or related degree |
Work Location | Bangalore |
Job Code | DE 001 |
- Strong in Networking domain – L2/L3 protocols, IPv4, IPv6, DHCP, DNS, SNMP, IGMP, VLAN, Wireless, OSPF, UDP, TCP
- Expertise in QA activities – test planning, test case development, test execution, test reporting.
- Excellent troubleshooting and debugging skills
- Experience in Software and Testing Life Cycle
- Familiarity with test tools & Traffic generators
- Able to independently bring-up individual networking setup
Soft skills:
- Should be able to handle tasks independently
- Quick learner and adaptable to changes, able to work under pressure Good-to-have skills
Job Features
Job Category | QA Engineer |
Experience | 4+ Yrs |
Educational Qualification | Any degree |
Work Location | Bangalore |
Job Code | QA 001 |